Created by sebastien.popoff on 10/10/2013
Off-axis holography is a popular technique to reconstruct a hologram. It allows retrieving the amplitude and the phase of a field pattern by measuring only one image with a digital camera. It relies on an intereferometric setup with a non-zero angle between the reference beam and the signal beam and requires to numerically filter the spatial frequencies. I provida Matlab and Python example codes.
Created by sebastien.popoff on 18/04/2013
How to control an SLM with Matlab/Octave using Psychtoolbox
Most spatial light modulators (SLMs) available are controllable like a normal computer monitor and are plugged on a computer with a DVI cable. Some SLMs are now sold with a dedicated card or can be controlled via USB. If you possess such a device, this tutorial is not for you. The first requirement to control the SLM with a DVI/HDMI cable is to have a graphic card with two monitor outputs, one for your screen, one for your SLM. Once plugged to the computer, the SLM is then handled by the operating system as a secondary monitor. No software is required to display an image on the SLM. For that reason, the constructor does not provide any code to use the SLM with Matlab/Octave or other software. One solution to send images with Matlab is to display an array in a figure that fits the size of the secondary monitor. Nevertheless, this technique presents some drawbacks due to the fact that you do not control directly the pixels of the SLM. For instance, the border of the figure, which may be different depending on the operating system, has to be taken into account. More importantly, the scaling of the figure does not guarantee that one pixel of the image displayed corresponds to one pixel of the SLM. For application where a very good resolution is needed, a blurred image on the SLM can be detrimental.
I present how to control directly the pixels of the SLM using Psychtoolbox, a free toolbox for Matlab and Octave that uses GPU acceleration. I show here a tutorial for Matlab, but the toolbox also exists for Octave and seems to work a similar way.